SDRPLAY RADIO SPECTRUM PROCESSOR RSP1A

13,230.00

1 in stock (can be backordered)

Description

TECHNICAL SPECIFICATIONS SDRPLAY RSP1-A

Receive 1kHz to 2GHz
Up to 10 Mhz bandwidth on the screen
14-bit sampling
Adjustable LNA gain
AM / FM / DAB bandstop filters
RF shielding in the plastic housing
Antenna connector: SMA female
Open API allows developers to create new applications around the receiver.
Compatible with SDR SOFTWARE ON WINDOWS, MAC, LINUX: SDRUno (recommended), HDSDR, SDR Console, CubicSDR (Mac / Linux)
Consumption: 120-175mA (without BIAS-T enabled)

Equipped with 11 band filters:

Low pass
2MHz

Pass
2 – 12MHz
12 – 30 Mhz
30 – 60MHz
60 – 120MHz
120 – 250MHz
250 – 300MHz
300 – 380Mhz
380 – 420Mhz
420 – 1000MHz

High pass
1000MHz

3 notch filters

FM: 85 – 100Mhz (> 50dB)
MW: 600 – 1550Mhz (> 30dB)
DAB: 165 – 230 Mhz (> 30dB)

Weight: 110g
Dimension: 95x80x30mm
2 years warranty
CE Standards

Installing SDRPlay online

You will find an online tutorial for quick installation of the RSP1-A: HTTP://WWW.SDRPLAY.COM/START-HERE/

To download the latest SDRPlay drivers and software for Windows, Mac, Linux and Android: HTTP://WWW.SDRPLAY.COM/DOWNLOADS/

Compatibility with Android smartphone or tablet: To date only the first generation RSP1 version is compatible with an Android smartphone or tablet and the SDRTOUCH SOFTWARE, with the installation of the ANDROID DRIVER SDRPLAY for SDR Touch. The Android version 7.0 is not yet supported by this driver that works for Android versions 3.1 to 6. The new version RSP1A and the RSP2 and RSP2PRO are not compatible with Android and SDRTouch currently.

Recommendations and support

1 – Do not connect the RSP1A directly to the same antenna as your transmitter, or to an antenna in the near field of a transmitting antenna as this may cause irreversible damage.

2 – The RSP1A is sensitive to electrostatic discharge which can damage the receiver if not protected or used correctly. It is recommended to disconnect the antenna in case of severe weather and to ensure an earthing of the antenna. Before reconnecting the coaxial cable after a thunderstorm, it is imperative the unloader (braid and core) to the ground.

In these 2 cases of loss of reception and RF damage, the warranty will not apply and the equipment neither repaired, exchanged or refunded. The signs of RF damage are characterized by signs of hot on or around components near the signal input, a burning smell is also an indication of RF damage.

For any support request, SDRPlay offers an online platform to get in touch directly with the technical support team for our customers: REQUEST FOR OFFICIAL SUPPORT SDRPLAY.

Reviews

There are no reviews yet.

Be the first to review “SDRPLAY RADIO SPECTRUM PROCESSOR RSP1A”

Your email address will not be published. Required fields are marked *